3DLAC Stick 00004 adhesive for 3D printers with a sponge applicator, 80 ml

Product description

3DLAC Stick adhesive for 3D printers with sponge applicator, 80 ml is a special adhesive product designed to improve the adhesion of the first filament layer to the print bed.

Thanks to its practical sponge applicator, it allows for precise and even glue application without unnecessary splattering. Helps prevent prints from coming loose during 3D printing and reduces the formation of so-called warping, i.e. the unwanted twisting and lifting of the edges of printed models.

Unlike standard adhesive sprays, 3DLAC Stick has a water-based, alcohol-free formula. The integrated sponge applicator makes it easier to control the amount of adhesive applied, minimizes mess, and reduces unnecessary product waste. Thanks to its direct application, it is also suitable for smaller, more detailed 3D prints. After printing, the print bed can be easily cleaned with water.

Main benefits of 3DLAC Stick adhesive

• Reliable first-layer adhesion – helps keep the printed model firmly attached to the print bed.
• Warping protection – reduces corner curling and unwanted print detachment during 3D printing.
• Sponge applicator – enables precise, controlled, and even application of adhesive directly onto the printing surface.
• Alcohol-free composition – the water-based product is practical for storage and transport.
• Compatibility with various filaments – suitable for PLA, ABS, PETG, and other common 3D printing materials.
• Clean and economical application – reduces product waste and mess during application.
• Easy to clean – glue residue can be easily removed from the print bed with water.

What is 3DLAC Stick adhesive used for?

3DLAC Stick adhesive for 3D printing is applied directly to the print bed, where it creates an adhesive layer that helps ensure the first layer of filament adheres firmly. This reduces the risk of the model shifting, warping, or detaching during printing.

The product is suitable for printing with PLA, ABS, and PETG materials, as well as other common filaments. Thanks to the sponge applicator, glue can be applied only to the desired area of the print bed, which is especially practical when preparing smaller or more detailed 3D models.

How to Use 3DLAC Stick Correctly?

1. Shake the product thoroughly before use.
2. Turn the bottle with the applicator facing down.
3. Gently press the sponge onto a clean, dry print bed.
4. Apply a thin, even layer of adhesive to the desired area.
5. Let the product dry slightly, then start 3D printing.
6. After printing is complete, the print bed can be easily cleaned with water.

3DLAC Stick adhesive for 3D printers with sponge applicator, 80 ml is a practical solution for improving print-bed adhesion and reducing warping. Thanks to its precise application, alcohol-free formula, and easy cleaning, it is suitable for both beginners and experienced 3D printer users.