3DLAC 00001 Adhesive Spray for 3D Printers, 400 ml

Product description

3DLAC adhesive spray for 3D printers, 400 ml is a special adhesive for 3D printer build plates that ensures reliable first-layer filament adhesion and helps prevent prints from detaching during printing.

It is designed for 3D printers with a heated bed and effectively reduces so-called. warping, i.e. unwanted twisting and lifting of the edges of a printed model.

The spray creates a thin, even adhesive layer that helps keep the print firmly attached to the build plate. Once printing is complete and the build plate has cooled, the model can be removed more easily. Thanks to its simple application and easy cleaning, 3DLAC is a practical aid for everyday 3D printing.

Main benefits of 3DLAC adhesive spray

• Reliable first-layer adhesion – helps keep the printed model on the build plate during 3D printing.
• Warping protection – reduces corner curling and unwanted print detachment.
• Easy model removal – once the print bed has cooled, the finished print can be removed more easily.
• Quick and easy application – the spray allows you to apply a thin, even layer.
• Compatibility with various filaments – suitable for PLA, PETG, ABS, nylon, and TPU.
• Use on various print surfaces – compatible with glass, PEI, and BuildTak.
• Easy to clean – residues of the adhesive preparation can be removed with water or a suitable cleaning agent.

What is 3DLAC adhesive spray used for?

3DLAC adhesive for 3D printing is applied directly to the print bed, where it creates an adhesive layer between the surface and the first layer of the printed model. This helps address one of the common problems in 3D printing: insufficient filament adhesion to the print bed.

It is suitable for printing with common materials such as PLA, PETG, and ABS, as well as nylon and TPU. The resulting adhesion may vary depending on the material and printing surface.

How to use 3DLAC adhesive spray correctly?

1. Shake the spray thoroughly before use.
2. Apply a thin, even layer to a clean print bed from a distance of approximately 20 cm.
3. Let the product dry.
4. Start the 3D print using the recommended settings for the filament used.
5. After printing is complete, let the build plate cool down and then carefully remove the model.

3DLAC adhesive spray for 3D printers, 400 ml is a simple solution for improving print bed adhesion, reducing warping, and achieving more reliable 3D printing results.