Virtuos HM-765A EHE0022, 2D reader, module, USB

Product description

The Virtuos HM-765A is a built-in 2D barcode scanner module designed for reliable scanning in industrial environments. Thanks to its compact design and robust construction, it is ideally suited for integration into kiosks, self-service terminals, logistics systems, or other embedded devices where fast and accurate product identification is required. This fixed module combines modern sensing technologies with high durability, ensuring trouble-free operation even in demanding conditions.

Key features

• Built-in modular design intended for installation directly into equipment
• Support for reading both 1D and 2D barcodes in a single module
• Sensitive CMOS sensor with a resolution of 640 × 480 px for reading even under extreme lighting conditions
• High reading speed of up to 60 frames per second
• Optimized for reading codes from mobile device displays (mobile payments)
• Automatic reading mode and code detection
• Audible and visual indication of successful scan
• Support for Czech UTF-8 characters from texts in 2D codes

Technology and performance

The module uses a 32-bit ARM processor, which ensures fast decoding even of difficult-to-read codes, such as blurred, crumpled, low-contrast, or high-density codes.

The sensor is capable of operating even in direct sunlight with an intensity of up to 100,000 lux. The reading field has a width of 6–36 cm and a reading angle of up to 65° horizontally and 60° vertically, allowing flexible placement within the device. The sensor resolution is better than 3 mil, ensuring accurate capture of code details.

Connectivity and compatibility

The reader is equipped with a USB interface with the option of keyboard or serial port (RS232) emulation, enabling easy integration without the need to install drivers. Comes with a 1.45 m USB connection cable. The module is compatible with a wide range of operating systems, including Windows 7–11, Windows Embedded / IoT, iOS, Android, and Linux. Programming can be performed using configuration barcodes, and the firmware can be updated online.

Supported standards

Supported 1D codes include EAN-13, EAN-8, UPC-A, UPC-E, Code 128, Code 39, Code 93, Codabar, GS1-128, GS1 DataBar, RSS14, Interleaved 2 of 5, and Industrial 2 of 5. In the area of 2D codes, the reader supports QR Code, Micro QR, Data Matrix, PDF417, Micro PDF417, and Aztec Code.

Technical parameters and durability

The module has an IP54 rating, which ensures protection against dust and splashing water. The operating temperature ranges from -10 °C to +50 °C, the storage temperature from -20 °C to +60 °C, and the humidity from 5% to 95% non-condensing. The supply voltage is DC 3.6–5.5 V, with a current draw of 42 mA at idle and 142 mA during operation. The module dimensions are 143 × 119 × 68 mm and the weight is 250 g. The light source consists of white LEDs for illumination and red LEDs for aiming.